| 钢木车库门不开裂方案 |
| 添加时间：2020/8/1 15:11:28 浏览次数： |
| 钢木车库门不开裂方案 Scheme of steel wood garage door not cracking 1、 首先是有设置遮雨篷，雨水可以直接淋到门上； 1. First of all, there is a canopy, which can directly rain on the door; 2、 门板涨缩除了受自然环境的影响以外，还与材料本身的变形程度有关； 2. In addition to the influence of natural environment, the rise and contraction of door panel is also related to the deformation degree of material itself; 3、 可以采用变形较小的材料，并且控制好材料的含水率； 3. The material with small deformation can be used and the moisture content of the material can be controlled well; 4、 根据当地的自然气候条件，生产门扇的木材要进行烘干处理，并且要回潮一周以上，给材料足够的养生期，使材料的含水率稳定在12%左右，然后再开始开料加 ； 4. According to the local natural climate conditions, the wood for door leaf production should be dried, and the moisture content should be maintained for more than one week, so that the moisture content of the material can be stabilized at about 12%, and then the material can be opened and added; 5、 另外生产过程中材料的含水率也要控制好，从开料到半成品直至较交油漆前均需保证材率料不吸潮，含水率不上升。这就需要材料及时放入恒温房以保持木材的含水率不上升； 5. In addition, the moisture content of materials in the production process should also be well controlled. From the opening of materials to semi-finished products to the comparison of paints, the moisture content of materials should not be hygroscopic and the moisture content should not rise. This requires that the materials be put into the constant temperature room in time to keep the moisture content of wood from rising; 6、 在制作工艺上，通过不同结的的隼接结构，在门结构最重要的地可以变形地方，加入防变形胶条，这样把变形变为最小。不会应响取门的外观及使用。 6. In the manufacturing process, through the Falcon joint structure with different knots, anti deformation adhesive strip is added at the most important place where the door structure can be deformed, so as to minimize the deformation. The appearance and use of the door will not be affected. |
| 上一页 卷帘车库门特点 |
| 下一页 车牌识别流程 |
Copyright © 技术支持：遨游网络