| 实木门不开裂方法 |
| 添加时间：2018/12/17 14:32:33 浏览次数： |
| 1、 首先是有设置遮雨篷，雨水可以直接淋到门上； 1. First of all, there is a canopy, which can rain directly on the door. 2、 门板涨缩除了受自然环境的影响以外，还与材料本身的变形程度有关； 2. The expansion and contraction of door panels are not only affected by natural environment, but also related to the deformation degree of materials themselves. 3、 可以采用变形较小的材料，并且控制好材料的含水率； 3. The material with smaller deformation can be used and the moisture content of the material can be well controlled. 4、 根据当地的自然气候条件，我们生产门扇的木材要进行烘干处理，并且要回潮一周以上，给材料足够的养生期，使材料的含水率稳定在12%左右，然后再开始开料加工。 4. According to the local natural climatic conditions, the wood for door and fan production needs to be dried and moisturized for more than a week to provide sufficient curing period for the material, so that the moisture content of the material can be stabilized at about 12%, and then the cutting process can be started. 5、 另外生产过程中材料的含水率也要控制好，从开料到半成品直至较交油漆前均需保证材率料不吸潮，含水率不上升。这就需要材料及时放入恒温房以保持木材的含水率不上升。 5. In addition, the moisture content of materials in the production process should also be well controlled. From raw materials to semi-finished products to before delivery of paint, it is necessary to ensure that the moisture content of materials does not absorb and does not rise. This requires materials to be put into the thermostat in time to keep the moisture content of wood from rising. 6、 在制作工艺上，通过不同结的的隼接结构，在门结构最重要的地可以变形地方，加入防变形胶条，这样把变形变为最小。 6. In the manufacturing process, through the Falcon joint structure of different knots, in the most important place where the door structure can be deformed, add anti-deformation tape, so as to minimize the deformation. |
| 上一页 车库门注意事项 |
| 下一页 实木车库门 |
Copyright © 技术支持：遨游网络