| 伸缩门的配置及特点 |
| 添加时间：2017/7/27 15:44:29 浏览次数： |
| 伸缩门的配置及特点 The configuration and characteristics of the expansion door 1、智能红外线防爬装置：遇到有人攀爬伸缩门时，系统将自动报警，为门内的安全提供保障。 1. Intelligent infrared anti-climbing device: when someone climbs the telescopic door, the system will automatically call the alarm and provide security for the security of the door. 2、特种型材：在高硬度锌铝合金型材上加上不同几何形状筋骨，极大增强型材强度；表面经特殊电泳处理，光泽度高，不易粘尘，不被污染气体腐蚀，绝不生锈，保新期长。 2. Special profile: the strength of profile is enhanced by adding different geometrical shape to the profile of high hardness and zinc aluminum alloy. The surface is treated with special electrophoresis, the gloss is high, not easy to stick to dust, not to be polluted by the gas corrosion, not rust, the new period is long. 3、工程塑料：门体主要塑料件（如管材与管材间的连接，塑料件，门体活动部件等等）采用高质量工程塑料（如ABS、PC、PA），韧性高，耐冲击，抗扭曲，耐磨，耐冻，耐晒，不易老化，使用寿命长。 3, engineering plastic: door body mainly plastic parts (such as pipe and pipe connections between, plastic parts, door a body moving parts, etc.) using high quality engineering plastics such as ABS, PC, PA, high toughness, impact resistance, resistance to distortion, abrasion resistance, cold resistance, resistance to bask in, not easy ageing, long service life. 4、智能红外线探头防碰撞装置：门体在关闭过程中，将启动红外线探头进行探测，在30～50cm距离内如探测到人或异物，可自动返回运行，保障行人及车辆的安全。 4, intelligent infrared probe collision device: door body in the process of closing, will start the infrared sensor to detect, such as detected at 30 ~ 50 cm distance or foreign body, can return to run automatically, to ensure the safety of pedestrians and vehicles. 5、标准结构:门排间距（主料之间的距离，不含主料尺寸）采用伸缩门标准尺寸320～350mm（参照国外技术），保证交管最固，并大大减少运行噪音。独特工艺制作门体主框架型材由塑料件连接而成，连接位的螺丝固定采用隐型设计，提高门体的外观性，型材与塑料件的连接则采用冲、压、钻等工艺，使门体结构牢固, 绝无焊点。 5, the structure of the standard: row spacing (the distance between the main ingredient, excluding meal size) the gate dimension 320 ~ 320 mm (refer to foreign technology), to guarantee the most solid traffic, and greatly reduce the running noise. Unique craft door can be connected with the main frame profiles by plastic parts, connecting screws used stealth design, improve the body appearance, profiles and plastic parts of connection is adopted, such as pressure, drilling technology, make the door a body structure is firm, no solder joints. 6、交叉连接设计：交叉管采用特殊工艺冲制而成，并配用超级PA耐磨套，与圆管紧密结合不仅使门排结构更加牢固，而且保证运行更加平滑。 6, cross connection design: cross tube USES a special process into the system, and with super PA wear-resisting, closely combined with circular tube not only make the door structure more solid, and guarantee the operation more smooth. |
| 上一页 伸缩门的安装及日常维护技巧 |
| 下一页 没有了 |
Copyright © 技术支持：遨游网络