速通门作为硬件设备平常除了访客系统,应用最多的就是门禁系统了,两者结合的方式也有很多种。
As a hardware device, the QuickPass door is usually used in addition to
the visitor system, and the access control system is the most widely
used. There are many ways to combine the two.
实现门禁闸机系统的控制方式有很多,可以用IC、ID卡或者人脸识别、指纹等生物识别方式,门禁用到ID和IC两种卡片也是有区别的,IC门禁有加密功能,存贮容量也大,广泛用于一卡通和会员卡,而ID卡是只读卡,广泛用于通道门禁和停车场。这种方式如果出现丢卡的情况也是无法使用的,所以随着生物识别技术的提高,在刷卡同时设有刷脸授权、指纹识别的方式。
There are many ways to realize the control of the access gate system,
such as IC, ID card, face recognition, fingerprint and other biometric
methods. There are also differences between ID card and IC card when the
door is disabled. IC access has encryption function and large storage
capacity, which is widely used in all-in-one card and membership card,
while ID card is read-only card, which is widely used in access control
and parking lot. This method can't be used if the card is lost, so with
the improvement of biometric technology, the method of face
authorization and fingerprint identification is set at the same time
when swiping the card.
速通门,借助以CPU处理器为核心
井盖钢模具 U型槽模具 天津水处理设备 检查井钢模具 保定公司注册 u型槽模具 流水槽模具 的控制器、信息采集器和电控锁等组成的控制网络系统,经过信息读取处理,实现对门禁开关的控制,然后再给速通门下达开关门摆的指令。
With the help of the control network system composed of CPU processor as
the core controller, information collector and electronic control lock,
the quick pass door realizes the control of the access control switch
after the information reading and processing, and then gives the command
of opening and closing the door swing to the quick pass door.
然后通行人员依据授权卡或者已经提前记录的指纹或者人脸进行比对,这样就可以轻松便捷的进行使用场合的进出了。
Then the passers-by compares the authorized card or the fingerprint or
face that has been recorded in advance, so that they can easily access
the use occasions.