1、接通电源，控制盒电源指示灯亮。
1, turn on the power, control box power indicator light.
2、开门：按“开”键，工作指示灯亮，门体收缩，大门通道自动打开。
2, open the door: press the "open" key, the work indicator light is bright, the door body contracts, and the main entrance opens automatically.
3、关门：按“关”键 ，工作指示灯亮，门体伸展，大门通道自动关闭。
3, close: press the "off" key, the work indicator light is bright, the door body extends, the gate channel automatically closes.
4、手动：遇到停电时，可打开机头箱门，用专用钥匙插入匙孔，旋转180度，即可转为人工推拉。
4. Manual: When power failure occurs, the door of the headbox can be opened, the keyhole can be inserted with a special key, and the key can be rotated 180 degrees, which can be turned into manual push-pull.
5、遥控:：手持遥控手柄可在控制盒周围10-30米内（根据现场的无线电通讯环境而定）活动控制，按遥控手柄的“开”键，大门自动打开，按“关”键，大门自动关闭。
5. Remote control: The hand-held remote control handle can be controlled within 10-30 meters around the control box (depending on the radio communication environment on the spot). Press the "open" key of the remote control handle, the door opens automatically, and the door closes automatically by pressing the "close" key.